A priori bounds and multiplicity for fully nonlinear equations with quadratic growth in the gradient

We consider fully nonlinear uniformly elliptic equations with quadratic growth in the gradient, such as

$?F(x,u,Du,D^{2}u)=\lambda c(x)u+〈M(x)Du,Du〉+h(x)$

in a bounded domain with a Dirichlet boundary condition; here $\lambda \in \mathbb{R}$, $c,h\in L^p(\mathrm{\Omega })$, $p>n\ge 1$, $c?0$ and the matrix M satisfies $0<{\mu }_{1}I\le M\le {\mu }_{2}I$. Recently this problem was studied in the “coercive” case $\lambda c\le 0$, where uniqueness of solutions can be expected; and it was conjectured that the solution set is more complex for noncoercive equations. This conjecture was verified in 2015 by Arcoya, de Coster, Jeanjean and Tanaka for equations in divergence form, by exploiting the integral formulation of the problem. Here we show that similar phenomena occur for general, even fully nonlinear, equations in nondivergence form. We use different techniques based on the maximum principle.We develop a new method to obtain the crucial uniform a priori bounds, which permit to us to use degree theory. This method is based on basic regularity estimates such as half-Harnack inequalities, and on a Vázquez type strong maximum principle for our kind of equations.     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

Two solutions for a singular elliptic equation with critical growth at infinity

We look for positive solutions for the singular equation $-\Delta u-\frac{1}{2}\left(x\cdot \nabla u\right)=\mu h\left(x\right)u^{q-1}+\lambda u+u^{(N+2)/(N-2)},\text{in }{\mathbb{R}}^N,$ where $N\ge 3$, $\lambda >0$, $\mu >0$ is a parameter, $0<q<1$ and $h$ has some summability properties. By using a perturbation method and critical point theory, we obtain two solutions when $max\{1,N/4\}<\lambda <N/2$ and the parameter $\mu >0$ is small.     

Compressibility of random walker trajectories on growing networks

We find that the simple coupling of network growth to the position of a random walker on the network generates a traveling wave in the probability distribution of nodes visited by the walker. We argue that the entropy of this probability distribution is bounded as the network size tends to infinity. This means that the growth of a space coupled to a random walker situated in it constrains its dynamics to a set of typical random walker trajectories, and walker trajectories inside the growing space are compressible.     

Al2O3衬底无催化剂生长GaN纳米线及其光学性能

采用一种绿色的等离子增强化学气相沉积法,以Al2O3为衬底, Ga金属为镓源, N2为氮源,在不采用催化剂的情况下,成功制备获得了结晶质量良好的GaN纳米线.研究表明,生长温度可显著调控GaN纳米线的形貌,当反应温度为950℃时,生长出的GaN微米片为六边形;当反应温度为1000℃时,生长出了长度为10-20μm的超长GaN纳米线.随着反应时间增加, GaN纳米线的长度增加. GaN纳米线内部存在着压应力,应力大小为0.84 GPa.同时,也进一步讨论了GaN纳米线无催化剂生长机制. GaN纳米线光致发光结果显示, GaN纳米线缺陷较少,结晶质量良好,在360 nm处有一个较为尖锐的本征发光峰,可应用于紫外激光器等光电子器件.本研究结果将为新型光电器件低成本绿色制备提供一个可行的技术方案.     

水硬性石灰合成及拉破坏特性试验研究

水硬性石灰在欧洲石质文物修复和加固中获得了很大成功。我国的石质文物主要是砂岩,水硬性石灰的修复效果不好。为满足我国石质文物修复和加固的需求,本文以石灰石和黏土为原料,在950℃煅烧不同时间,制备出水硬性石,对试样的成分、微观形貌、收缩率、抗拉强度和拉破坏过程等进行了研究。结果表明:(1)试样中含有水硬性成分2CaO·SiO2(C2S);煅烧8h时,成分与欧洲水硬性石灰NHL5接近;1.5CaO·SiO2·xH2O(C-S-H)和CaCO3的含量随龄期的增加逐渐增加。(2)龄期1~3d,收缩率较小;龄期4~6d,收缩率以线性规律增加;7d以后,收缩率趋于稳定。(3)局部变形区随拉应力的增加而变大,邻近局部变形区逐渐合并,形成面积更大的应变局部化带;载荷超过峰值后,产生微裂隙;随载荷进一步增加,微裂隙扩展,贯穿整个试件,发展成宏观裂隙,使试件破坏。(4)抗拉强度随龄期的增加而增加,水硬性石灰中C-S-H、CaCO3等相互交织,构成空间致密体,使试件力学强度提高。合成的水硬性石灰物理力学性能与欧洲水硬性石灰NHL5相近,并且成分均匀、可控,在石质文物修复和加固工程中具有良好应用前景。     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

Synthesis and structure–property relationship of carbazole‐alt‐benzothiadiazole copolymers

A series of four π‐conjugated carbazole‐alt‐benzothiadiazole copolymers (PCBT) were prepared by Suzuki cross‐coupling reaction between synthesized dibromocarbazoles as electron‐rich subunits and 4,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)?2,1,3‐benzothiadiazole as electron‐deficient subunits. The subunits were directly linked through 2,7‐ or 3,6‐ positions of the carbazole. In addition, the carbazole monomers have been N‐substituted by a branched or a linear side‐chain. The chemical structure of the copolymers and their precursors was confirmed by NMR and IR spectroscopies, and their molar masses were estimated by SEC. Thermal analysis under N₂ atmosphere showed no weight loss below 329°C, and no glass transition was observed in between 0 and 250°C. The band gaps of all PCBTs evaluated by optical spectroscopies and by cyclic voltammetry analysis were consistent with expectations and ranged between 2.2 and 2.3 eV. Finally, 2,7 and 3,6 linkages were shown to influence optical properties of PCBTs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2059–2068     

pH/temperature double responsive behaviors and mechanical strength of laponite‐crosslinked poly(DEA‐co‐DMAEMA) nanocomposite hydrogels

A nanocomposite (NC) hydrogel crosslinked by inorganic Laponite XLG was successfully synthesized via in situ free radical polymerization of monomers N,N‐diethylacrylamide and (2‐dimethylamino) ethyl methacrylate (DMAEMA). Polymerization was carried out at room temperature due to the accelerating effect of DMAEMA. The as‐prepared hydrogels displayed controlled transformation in optical transmittance and volume in response to small diversification of environmental factors, such as temperature and pH. The compressive strength of swollen D_6:1G₆ hydrogels was as high as 2219 kPa while compressive strain was 95%. Cyclic compression measurement exhibited good elastic properties of NC hydrogels. This work provides a facile method for fabricating stimuli‐responsive hydrogels with superior mechanical property. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 876–884     

Synthesis,bioactivity and functional evaluation of linker-modified allatostatin analogs as potential insect growth regulators

Insect growth regulators play an important role in integrated pest management strategies.The FGLa–allatostatins(ASTs)are a family of neuropeptides that can inhibit juvenile hormone(JH)biosynthesis by the corpora allata(CA)of Diploptera punctata in vitro,are regarded as insect growth regulator candidates.In the search for new potential mimics and to explore the effect of linker length on inhibiting JH biosynthesis,a series of AST analogs were synthesized by modifying the linker of K24,which was found to have a significant effect on JH biosynthesis in vitro in our previous study.Functional evaluation demonstrated that all the target compounds can activate the Dippu-Ast R,albeit with different potencies.Analog L6 with the longest linker(n=5),exhibited not only a promising effect on inhibition of JH biosynthesis both in vitro and in vivo,but also good activity in inhibiting basal oocyte growth.Structure–activity relationships(SAR)studies showed that longer linkers provided greater contribution to activity.